Sbus<N>:Spi:source:frame - Agilent Technologies Infiniium 90000 Series Programmer's Manual

28
Serial Bus Commands
:SBUS<N>:SPI:SOURce:FRAMe
Command
:SBUS<N>:SPI:SOURce:FRAMe <source>
<source> ::= {CHANnel<N> | FUNCtion<F> | WMEMory<N> | DIGital<M>}
The :SBUS<N>:SPI:SOURce:FRAMe command sets the frame source.
<N>
CHANnel<N> is an integer, 1- 4.
WMEMory<N> is an integer, 1- 4.
<F>
FUNCtion<F> is an integer, 1- 16.
<M> An integer, 0- 15. Digital channels are available on mixed- signal
oscilloscopes.
Query
:SBUS<N>:SPI:SOURce:FRAMe?
The :SBUS<N>:SPI:SOURce:FRAMe? query returns the current frame source
for the SPI serial frame.
Returned Format
[:SBUS<N>:SPI:SOURce:FRAMe] <source><NL>
See Also
•
•
•
•
•
752
":SBUS<N>:SPI:SOURce:CLOCk"
":SBUS<N>:SPI:SOURce:MOSI"
":SBUS<N>:SPI:SOURce:MISO"
":SBUS<N>:SPI:SOURce:DATA"
":SBUS<N>:SPI:FRAMe:STATe"
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
on page 750
on page 754
on page 753
on page 751
on page 749