Sbus<N>:Spi:bitorder - Agilent Technologies Infiniium 90000 Series Programmer's Manual

28
Serial Bus Commands
:SBUS<N>:SPI:BITorder
Command
:SBUS<N>:SPI:BITorder <order>
<order> ::= {LSB | MSB}
The :SBUS<N>:SPI:BITorder command selects the bit order, most significant
bit first (MSB) or least significant bit first (LSB), used when displaying
data in the serial decode waveform and in the Lister.
<N> An integer, 1- 4.
Query
:SBUS<N>:SPI:BITorder?
The :SBUS<N>:SPI:BITorder? query returns the current SPI decode bit
order.
Returned Format
[:SBUS<N>:SPI:BITorder] <order><NL>
See Also
•
746
":SBUS<N>:MODE" on page 740
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference