Editing/Removing Reference-Tag - Extreme Networks Summit WMScanner User Manual

Measurement Surveys
To get back to the Place Reference-Tag dialog box, right-click or press the ESC key. Once you are satisfied
with reference-tag placement, you are ready to configure the reference-tag settings.

Editing/Removing Reference-Tag

The Equipment > Reference-Tag > Edit/Remove Reference-Tag command allows you to edit, remove, move,
or copy any reference-tags in the drawing. Selecting Edit/Remove Reference-Tag command from the
Equipment > Reference-Tag menu opens the dialog box.
The Edit/Remove Reference-Tag dialog box lists all the reference-tags in the drawing, with its description,
and floor location.
Summit WMScanner Users Guide
160