Enable Diffserv Examination Port - Extreme Networks ExtremeWare XOS Command Reference Manual

QoS Commands

enable diffserv examination port

enable diffserv examination port [<port_list> | all]
Description
Enables the DiffServ field of an IP packet to be examined in order to select a QoS profile.
Syntax Description
port_list
all
Default
N/A.
Usage Guidelines
The diffserv examination feature is disabled by default.
If you are using DiffServ for QoS parameters, Extreme Networks recommends that you also configure
802.1p or port-based QoS parameters to ensure that high-priority traffic is not dropped prior to reaching
the MSM.
Example
The following command enables DiffServ examination on selected ports:
enable diffserv examination ports 1:1,5:5,6:2
History
This command was first available in ExtremeWare XOS 10.1.
296
Specifies a list of slots and ports to which the parameters apply. May be in the
form 3-5, 2:5, 2:6-2:8.
Specifies that DiffServ examination is enabled for all ports.
ExtremeWare XOS 11.0 Command Reference Guide