[Sysname] ntp-service access peer 2001
ntp-service authentication enable
Syntax
ntp-service authentication enable
undo ntp-service authentication enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the ntp-service authentication enable command to enable NTP authentication.
Use the undo ntp-service authentication enable command to disable NTP authentication.
By default, NTP authentication is disabled.
Examples
# Enable NTP authentication.
<Sysname> system-view
[Sysname] ntp-service authentication enable
ntp-service authentication-keyid
Syntax
ntp-service authentication-keyid keyid authentication-mode md5 value
undo ntp-service authentication-keyid keyid
View
System view
Default Level
2: System level
Parameters
keyid: Authentication key ID, in the range of 1 to 4294967295.
authentication-mode md5 value: Specifies to use the MD5 algorithm for key authentication, where
value represents authentication key and is a string of 1 to 32 characters.
Description
Use the ntp-service authentication-keyid command to set the NTP authentication key.
1-6
Need help?
Do you have a question about the S7906E and is the answer not in the manual?