Display Link-Aggregation Verbose - H3C MSR Series Command Reference Manual

Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG
Interface
-------------------------------------------------------------------------
BAGG1
BAGG10
Table 24 Command output
Field
Aggregation Interface Type
Aggregation Mode
Loadsharing Type
Actor System ID
AGG Interface
AGG Mode
Partner ID
Select Ports
Unselect Ports
Share Type

display link-aggregation verbose

Use display link-aggregation verbose to display detailed information about the aggregation
groups corresponding to the aggregate interfaces.
Syntax
display link-aggregation
[ interface-number ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups
corresponding to Layer 2 aggregate interfaces.
AGG Partner ID
Mode
S none
D 0x8000, 000f-e267-57ad
verbose
Select Unselect
Ports
1
2
Description
Aggregate interface type:
•
BAGG—Layer 2 aggregate interface.
•
RAGG—Layer 3 aggregate interface.
Aggregation group type:
•
S—Static link aggregation.
•
D—Dynamic aggregation.
Load sharing type:
•
Shar—Load sharing.
•
NonS—Non-load sharing.
Local system ID, which contains the system LACP priority and the
system MAC address.
Type and number of the aggregate interface.
Aggregation group type.
System ID of the partner, which contains the system LACP priority
and the system MAC address.
Total number of Selected ports.
Total number of Unselected ports.
Load sharing type: Only NonS is supported.
[ { bridge-aggregation
101
Share
Ports Type
0 NonS
0 Shar
| route-aggregation }