Aggregation Mode
Loadsharing Type
Actor System ID
AGG Interface
AGG Mode
Partner ID
Select Ports
Unselect Ports
Share Type
display link-aggregation verbose
Syntax
display link-aggregation verbose [ bridge-aggregation [ interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups
corresponding to Layer 2 aggregate interfaces.
interface-number: Aggregate interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
Field
Aggregation group type:
S for static link aggregation
D for dynamic aggregation
Load sharing type:
Shar for load sharing
NonS for non-load sharing
Local system ID, which comprises the system LACP priority and
the system MAC address
Type and number of the aggregate interface
Aggregation group type
System ID of the partner, which comprises the system LACP
priority and the system MAC address
Total number of selected ports
Total number of unselected ports
Load sharing type
9-11
Description