Hino S5-LJ05E04A Workshop Manual page 579

OIL COOLER ASSEMBLY
O-RING
OIL FILTER
SST
SHTS021271200006
LUBRICATION (J05E)
MOUNTING THE OIL FILTER
1. MOUNTING THE OIL FILTER
(1) Remove dirt on the oil filter cap mounting surface.
(2) Apply engine oil lightly to the 2 O-rings of a new oil filter element.
(3) Use the SST, mount the oil filter to the oil cooler assembly.
Tightening Torque:
39.2-49.0 N·m {400-499 kgf·cm, 29-36 lbf·ft}
SST: S0950-31090
Oil filer wrench
! CAUTION
Be careful not to damage the O-ring by twisting it.
2. ADDING ENGINE OIL
(1) Add engine oil through an oil filler.
Reference: MOUNTING AND DISMOUNTING THE ENGINE
(J05E), ENGINE ASSEMBLY, REPLACEMENT, NEXT STEPS
AFTER INSTALLATION (Page 5-14)
13–5