Hino S5-LJ05E04A Workshop Manual page 465

FUEL FEED PIPE No. 5
FUEL
DELIVERY
FUEL ADDITION VALVE
EXHAUST (J05E)
(4) Replace with 2 new gaskets and connect the fuel feed pipe No.5
to the fuel delivery with the union bolt.
Tightening Torque:
19.6 N·m {200 kgf·cm, 14.5 lbf·ft}
SHTS021271000086
4. CONNECTING THE HARNESS
(1) Connect the connector to the fuel addition valve.
! CAUTION
• Before inserting the connector, check that there are no spark
traces on the terminals.
•
When connecting, do not apply excessive force to the con-
nector on the fuel addition valve side. The connector may be
damaged.
SHTS021271000087
5. ADDING THE COOLANT
Reference: COOLING (J05E), RADIATOR, REPLACEMENT,
ADDING THE COOLANT (Page 12-13)
6. AIR BLEEDING OF FUEL SYSTEM
Reference: FUEL SYSTEM (J05E), FUEL FILTER AND CASE
(ENGINE SIDE), REPLACEMENT, AIR BLEEDING OF FUEL
SYSTEM (Page 7-16)
11–57