Hino S5-LJ05E04A Workshop Manual page 324

10–48
1
6
4
2
ENGINE MECHANICAL (J05E)
MOUNTING THE CRANKSHAFT PULLEY
1. MOUNTING THE CRANKSHAFT PULLEY
(1) Tighten the crankshaft pulley mounting bolts in the order as
shown in the figure.
Tightening Torque:
118 N·m {1,203 kgf·cm, 87 lbf·ft}
3
NOTICE
To prevent the co-rotation of the crankshaft, insert a large flat-
5
blade screwdriver into the flywheel gear from the inspection hole
of the flywheel housing and stop the rotation of the crankshaft.
SHTS021270900104
2. MOUNTING THE V-BELT
Reference:
REPLACEMENT, MOUNTING THE V-BELT (Page 16-9)
3. MOUNTING THE COOLING FAN ASSEMBLY AND FAN
SHROUD RING
Reference: COOLING (J05E), COOLING FAN AND FAN
CLUTCH, OVERHAUL, MOUNTING THE COOLING FAN &
FAN CLUTCH (Page 12-36)
STARTING/CHARGING (J05E), V-BELT,