Hino S5-LJ05E04A Workshop Manual page 14

1–10
FOR ALL MODELS
A
A
GENERAL INTRODUCTION
2. VEHICLE NOISE EMISSION CONTROL INFORMATION
• The Vehicle Noise Emission Control Information is affixed to the
left pillar of the cab. The name of manufacturer, production year
and month, and noise emission applicable to medium and heavy
trucks in conformity with U.S. EPA Regulations are displayed.
SHTS01ZZZ0000011
3. ENGINE SERIAL NUMBER
(1) The engine serial number is stamped on the cylinder block, as
shown in the illustration.
A: J05E
SHTS01ZZZ0000012
4. TRANSMISSION SERIAL NUMBER
(1) The transmission serial number is stamped on the transmission,
as shown in the illustration.
A: A465
SHTS01ZZZ0000013
5. CLEAN IDLE CERTIFIED LABEL FOR U.S.
•
Make sure that the following clean engine idling certified label is
affixed to the outside of the left door. By the CARB below, the
label must be affixed there to prove that the new vehicle with die-
sel engine manufactured from Jan., 2008 conforms to this low.
SHTS01ZZZ0000014
CARB § 1956.8. Exhaust Emission Standard and Test
Procedure (a) (b) Heavy-Duty Diesel Engine Idling
Requirements