Hino S5-LJ05E04A Workshop Manual page 149

ENGINE CONTROL (J05E)
MOUNTING THE IDLE SET VOLUME
1. MOUNTING THE IDLE SET VOLUME
(1) Insert the idle set volume in the same direction as the hole of the
instrument panel and fix it with the ring nut.
! CAUTION
•
Do not break the idle set volume.
•
Check the idle set volume for looseness.
(2) Fit the idle set button in the direction of the idle set volume claw.
Pull the idle set button to make sure that it is fixed and then con-
nect the harness connector.
! CAUTION
After mounting, pull the button to make sure that it is securely
SHTS021270500031
fixed.
6–17