Hino S5-LJ05E04A Workshop Manual page 345

HOUSING STAY
SHTS021270900147
ENGINE MECHANICAL (J05E)
(6) Pre tightening bolts for tight fitting to the flywheel housing and cyl-
inder block and tighten them with the specified tightening torques.
Tightening Torque:
97 N·m {989 kgf·cm, 72 lbf·ft}
M12
171.5 N·m {1,749 kgf·cm, 126 lbf·ft}
M14
2. MOUNTING THE CRANKSHAFT REAR OIL SEAL
Reference: ENGINE MECHANICAL (J05E), CRANKSHAFT
REAR OIL SEAL, REPLACEMENT, MOUNTING THE CRANK-
SHAFT REAR OIL SEAL (Page 10-63)
3. MOUNTING THE FLYWHEEL ASSEMBLY
Reference: ENGINE
ASSEMBLY,
ASSEMBLY (Page 10-59)
4. MOUNTING THE OIL PAN
Reference: LUBRICATION (J05E), OIL PAN, REPLACEMENT,
MOUNTING THE OIL PAN (Page 13-25)
5. MOUNTING THE HYDRAULIC PUMP
Reference: CHASSIS (S1-LXJE03A), BRAKE
Reference: CHASSIS (S1-LXJE04A), BRAKE
6. MOUNTING THE VACUUM PUMP
Reference: CHASSIS (S1-LXJE03A), BRAKE
Reference: CHASSIS (S1-LXJE04A), BRAKE
7. MOUNTING THE POWER STEERING PUMP
Reference: CHASSIS (S1-LXJE03A), STEERING
Reference: CHASSIS (S1-LXJE04A), STEERING
8. MOUNTING THE STARTER
Reference:
REPLACEMENT, MOUNTING THE STARTER (Page 16-4)
9. MOUNTING THE CYLINDER HEAD ASSEMBLY
Reference: ENGINE MECHANICAL (J05E), CYLINDER HEAD
ASSEMBLY, REPLACEMENT, MOUNTING THE CYLINDER
HEAD ASSEMBLY (Page 10-25)
MECHANICAL
OVERHAUL, MOUNTING
STARTING/CHARGING
10–69
(J05E), FLYWHEEL
THE FLYWHEEL
(J05E), STARTER,