Hino S5-LJ05E04A Workshop Manual page 336

10–60 ENGINE MECHANICAL (J05E)
(9) Tighten the flywheel assembly mounting bolts with the specified
tightening torque in the sequential order as shown in the figure.
Tightening Torque:
186 N·m {1,897 kgf·cm, 137 lbf·ft}
NOTICE
To prevent the co-rotation of the crankshaft, insert a large flat-
blade screwdriver into the flywheel gear from the inspection hole
of the flywheel housing and stop the rotation of the crankshaft.
(10) Loosen the all the bolts once.
(11) Tighten the bolts again in order as shown in the figure.
Tightening Torque:
SHTS021270900129
186 N·m {1,897 kgf·cm, 137 lbf·ft}
2. MOUNTING THE ENGINE MAIN REVOLUTION SENSOR
Reference: ENGINE CONTROL (J05E), ENGINE SPEED MAIN
SENSOR, REPLACEMENT, MOUNTING THE ENGINE SPEED
MAIN SENSOR (Page 6-12)