Hino S5-LJ05E04A Workshop Manual page 517

DOC UPSTREAM
TEMPERATURE
SENSOR
EXHAUST (J05E)
MOUNTING DOC UPSTREAM TEMPERATURE
SENSOR
1. MOUNTING DOC UPSTREAM TEMPERATURE SENSOR
(1) Connect the DOC upstream temperature sensor to the muffler
and fasten a harness clamp.
Tightening Torque:
25-35 N·m {255-357 kgf·cm, 18.4-25.8 lbf·ft}
! CAUTION
•
When reusing, clean the old anti-seizure lubricant on the
MUFFLER
DOC upstream temperature sensor and apply anti-seizure
lubricant (equivalent to NEVER-SEEZ Heavy Metal Free man-
ufactured by Bostic, Inc.) to the thread area.
•
A new DOC upstream temperature sensor has anti-seizure
SHTS021271000192
lubricant applied.
• Use care to avoid twisting or kink of a DOC upstream temper-
ature sensor harness.
2. CONNECTING THE HARNESS
(1) Connect the connector to the DOC upstream temperature sensor.
11–109