Laser Classification; General; Distancer, Measurements With Reflectors - Leica TS12P User Manual

1.6
1.6.1

General

1.6.2
General
Labelling
TS12P, Safety Directions

Laser Classification

General
The following chapters provide instructions and training information about laser safety
according to international standard IEC 60825-1 (2014-05) and technical report IEC TR
60825-14 (2004-02). The information enables the person responsible for the product
and the person who actually uses the equipment, to anticipate and avoid operational
hazards.

According to IEC TR 60825-14 (2004-02), products classified as laser class 1,
class 2 and class 3R do not require:
• laser safety officer involvement,
• protective clothes and eyewear,
• special warning signs in the laser working area
if used and operated as defined in this User Manual due to the low eye hazard
level.

National laws and local regulations could impose more stringent instructions
for the safe use of lasers than IEC 60825-1 (2014-05) and IEC TR 60825-14
(2004-02).

Distancer, Measurements with Reflectors

The EDM module built into the product produces a visible laser beam which emerges
from the telescope objective.
The laser product described in this section is classified as laser class 1 in accordance
with:
• IEC 60825-1 (2014-05): "Safety of laser products"
These products are safe under reasonably foreseeable conditions of operation and are
not harmful to the eyes provided that the products are used and maintained in accord-
ance with this User Manual.
Description
Wavelength
Pulse duration
Pulse repetition frequency (PRF)
Maximum average radiant power
Beam divergance
002916_002
a
a) Laser beam
Value
658 nm
800 ps
100 MHz
0.33 mW
1.5 mrad x 3 mrad
10