Distancer, Measurements With Reflectors; Distancer, Measurements Without Reflectors - Leica TS10 User Manual

1.6.2
General
Labelling
1.6.3
General
12
☞
National laws and local regulations could impose more stringent
instructions for the safe use of lasers than IEC 60825-1 (2014-05)
and IEC TR 60825-14 (2004-02).

Distancer, Measurements with Reflectors

The EDM module built into the product produces a visible laser beam which
emerges from the telescope objective.
The laser product described in this section is classified as laser class 1 in
accordance with:
IEC 60825-1 (2014-05): "Safety of laser products"
•
These products are safe under reasonably foreseeable conditions of operation
and are not harmful to the eyes provided that the products are used and main-
tained in accordance with this User Manual.
Description
Wavelength
Pulse duration
Pulse repetition frequency
Maximum average radiant power
Beam divergance
0016407_001

Distancer, Measurements without Reflectors

The EDM module built into the product produces a visible laser beam which
emerges from the telescope objective.
The laser product described in this section is classified as laser class 3R in
accordance with:
• IEC 60825-1 (2014-05): "Safety of laser products"
Direct intrabeam viewing may be hazardous (low eye hazard level), in particular
for deliberate ocular exposure. The beam may cause dazzle, flash-blindness
and after-images, particularly under low ambient light conditions. The risk of
injury for laser class 3R products is limited because of:
a
a Laser beam
Value
658 nm
800 ps
100 MHz
0.34 mW
1.5 mrad x 3 mrad
Safety Directions