System Startup When Adding Electronic Devices - YASKAWA JEPMC-MP2300-Y Series User Manual

This completes the system startup procedure.
Always save to flash memory when applications have been changed, e.g., the ladder program changed or
parameters set. The added information will be lost if not saved to flash memory and the power is turned OFF.
If the information is lost, load the application remaining on the hard disk of the personal computer to the
MP2300 and save to flash memory.
It is recommended that applications are backed up at appropriate times. Applications can be backed up by
logging on online to the application using MPE720 and selecting Transfer - All Files - From Controller to
MPE720. Refer to 2.1.6 ( 7 ) Dumping All Data on page 2-33 for information on how to dump all files.

2.3.2 System Startup when Adding Electronic Devices

Use the following procedure to start the system when adding SERVOPACKs, Optional Modules, and
other electronic devices.
b) Select Edit - Copy Current Value.
The data in the Input Data column in the SERVOPACK data saved to the MP2300 and the
data in the Current Value column is the data set to the SERVOPACK.
Refer to 11.3 SERVOPACK Parameter Data Flow on page 11-9 for information on the rela-
tionship between Current Value and Input Data.
c) Select File - Save to save the SERVOPACK settings for the axis to the MP2300.
8.
Save MP2300 Data to Flash Memory.
Return to the MPE720 File Manager Window and save to flash memory.
Refer to 2.1.6 ( 6 ) Saving to Flash Memory on page 2-31 page for information on how to
save to flash memory.
9.
Save Ladder Programs and Restart MP2300
Transfer the ladder program to the MP2300 and save to flash memory, and then turn the power
from OFF to ON to restart the MP2300.
Refer to 2.1.6 ( 3 ) Transfer Individual Programs on page 2-25 for information on transferring
ladder programs.
1.
Back Up Applications.
Before adding the electronic devices, log on to the MP2300 online using MPE720 and select
Transfer - All Files - From Controller to MPE720 to create a backup of the application.
For information on how to dump all files, refer to 2.1.6 ( 7 ) Dumping All Data on page 2-33.
2.
Turn OFF the MP2300.
Once the application has been backed up, log off from the MP2300 and turn OFF the MP2300
power.
2.3 System Startup Using Self-Configuration
2-61