YASKAWA JEPMC-MP2300-Y Series User Manual page 134

3 Module Specifications
3.4.1 LIO-01/LIO-02 Modules
[ c ] LED Indicators and Switch Settings
SW1
0
(Board Status
Indicator)
1
(DI Input
Indicator 1)
2
（DI Input
Indicator 2)
3
（DO Output
Indicator 1)
4
（DO Output
Indicator 2)
5
(PI Input
Indicator)
3-26
The LIO-01 and LIO-02 Module status display LED indicators (LD1 to LD8) change based on the
SW1 rotary switch settings (setting range: 0 to 5). The following table shows the indicator display for
DI and DO status according to the SW1 setting.
LED
Status When Lit
No.
LD1 Normal (Error when not lit)
LD2 One of the inputs D1_00 to DI_07 is ON.
LD3 One of the outputs DO_00 to DO_07 is ON.
LD4 Pulse A/B input. The Phase A/B is ON.
LD1 DI_00 is ON.
LD2 DI_01 is ON.
LD3 DI_02 is ON.
LD4 DI_03 is ON.
LD1 DI_08 is ON.
LD2 DI_09 is ON.
LD3 DI_10 is ON.
LD4 DI_11 is ON.
LD1 DO_00 is ON.
LD2 DO_01 is ON.
LD3 DO_02 is ON.
LD4 DO_03 is ON.
LD1 DO_08 is ON.
LD2 DO_09 is ON.
LD3 DO_10 is ON.
LD4 DO_11 is ON.
LD1 Pulse A input
LD2 Pulse B input
LD3 Pulse Z input
LD4
－
.
LED No.
LD5 Normal (Error when not lit)
LD6 One of the inputs DI_08 to DI_15 is ON.
LD7 One of the outputs DO_08 to DO_15 is ON.
LD8 Pulse Z input. The Phase Z is ON.
LD5 DI_04 is ON.
LD6 DI_05 is ON.
LD7 DI_06 is ON.
LD8 DI_07 is ON.
LD5 DI_12 is ON.
LD6 DI_13 is ON.
LD7 DI_14 is ON.
LD8 DI_15 is ON.
LD5 DO_04 is ON.
LD6 DO_05 is ON.
LD7 DO_06 is ON.
LD8 DO_07 is ON.
LD5 DO_12 is ON.
LD6 DO_13 is ON.
LD7 DO_14 is ON.
LD8 DO_15 is ON.
LD5 Coincidence detection
LD6 Phase-Z latch
LD7 DI latch
LD8
－
LD1 LD5
LD2 LD6
LD3 LD7
LD4 LD8
Indicators SW1
Status When Lit