YASKAWA JEPMC-MP2300-Y Series User Manual page 5

Manual Name
Σ-III Series SGM S/SGDS
MECHATROLINK-II
SERVOPACKs with Communication User's
Manual
Machine Controller MP900/MP2000 Series
Linear Servomotor Manual
Machine Controller MP900/MP2000 Series
New Ladder Editor User's Manual
Programming Manual
Machine Controller MP900/MP2000 Series
New Ladder Editor User's Manual
Operation
Machine Controller MP900/MP2000 Series
User's Manual, MECHATROLINK System
• DeviceNet is a registered trademark of the ODVA (Open DeviceNet Venders Association).
• PROFIBUS is a trademark of the PROFIBUS User Organization.
• Ethernet is a registered trademark of the Xerox Corporation.
• Microsoft, Windows, Windows NT, and Internet Explorer are registered trademarks of the Microsoft Corporation.
• Pentium is a registered trademark of the Intel Corporation.
• Other product names and company names are the trademarks or registered trademarks of the respective company. "TM"

and the mark do not appear with product or company names in this manual.
Safety Information
The following conventions are used to indicate precautions in this manual. These precautions are
provided to ensure the safe operation of the MP2500(M) and connected devices. Information marked
as shown below is important for the safety of the user. Always read this information and heed the pre-
cautions that are provided.
The conventions are as follows:
WARNING
CAUTION
PROHIBITED
MANDATORY
Manual Number
SIEP S800000 11
SIEP C880700 06
SIEZ-C887-13.1
SIEZ-C887-13.2
SIEZ-C887-5.1
Copyrights
Indicates precautions that, if not heeded, could possibly result in loss of life, serious
injury, or property damage.
Indicates precautions that, if not heeded, could result in relatively serious or minor
injury, or property damage.
If not heeded, even precautions classified under
depending on circumstances.
Indicates prohibited actions. Specific prohibitions are indicated inside
For example,
Indicates mandatory actions. Specific actions are indicated inside
For example,
Describes the models, specifications, wiring, trial
operation, adjustment, function application meth-
ods, maintenance, inspection, and MECHA-
TROLINK communication of the Σ-III Series
SERVOPACKs and Servomotors.
Describes the connection methods, setting meth-
ods, and other information for Linear Servomo-
tors.
Describes the programming instructions of the
New Ladder Editor, which assists MP900/
MP2000 Series design and maintenance.
Describes the operating methods of the New Lad-
der Editor, which assists MP900/MP2000 Series
design and maintenance.
Describes MECHATROLINK distributed I/O for
MP900/MP2000 Series Machine Controllers.
indicates prohibition of open flame.
indicates mandatory grounding.
Contents
can lead to serious results
CAUTION
●
.
.
v