When Connecting To Yrc1000 The Multiple Welding Power Sources Of Digital Interfaces And Also Other Devices With Data Transmission Function Using Ethernet Function - YASKAWA YRC1000 Instructions Manual

HW1484216
2.4.2 When Connecting to YRC1000 the Multiple Welding Power Sources of Digital Interfaces
and also Other Devices with Data Transmission Function using Ethernet Function
2 Setup
2.4 Connection of Welding Power Source and YRC1000
As shown in the following figure, connect the LAN cable to ACP01 for LAN
(CN106) using a switching hub.
CN106
for LAN
(You can use either cross cable or straight cable.)
• Use the industrial switching hub that we recommend. (The system
may not properly work with a hub other than this, and we are not
responsible for any problems that may occur.)
• Our recommended switching hub: Model EDS-205 (manufactured
by MOXA)
2-4
YRC1000
Welder1
Digital I/F
Power Source
ACP01
Welder2
Digital I/F
Power Source
Welder3
Digital I/F
Power Source
HUB
CAUTION
HW1484216
15/79