YASKAWA JEPMC-MP2300-Y Series User Manual page 116

3 Module Specifications
3.2.2 External Appearance, LED Indicators, and Switch Settings
( 3 ) Switch Settings
No. Name
STOP
6
SUP
5
4 INIT
CNFG
3
MON
2
TEST
1
3-8
The DIP switch sets the operating conditions for the Basic Module when the power is turned ON.
STOP
6
SUP
5
INIT
4
CNFG 3
2
MON
SW1
1
TEST
OFF ON
Setting Operating Mode
ON User program stopped
OFF User program running
ON System use
OFF Normal operation
ON Memory clear
OFF Normal operation
ON Configuration mode
OFF Normal operation
ON System use
OFF Normal operation
ON System use
OFF Normal operation
Default
Setting
Stops the user program execution. Enabled only
OFF
when the power is turned ON.
OFF
Always leave set to OFF.
Set to ON to clear the memory. If this switch is set
OFF
to OFF, the program stored in flash memory will
be executed.
Set to ON to execute self-configuration for
OFF
connected devices.
OFF
Always leave set to OFF.
OFF
Always leave set to OFF.
Details