YASKAWA JEPMC-MP2300-Y Series User Manual page 177

[ b ] Procedure for Mounting to DIN Rail
Use the following procedure to attach the DIN rail mounting parts to the MP2300 and then mount the
MP2300 to the DIN rail.
1.
2.
Insert the DIN rails in the two slots on the rear of the MP2300 as shown in the follow-
ing figure.
DIN rail
mounting parts
Insert the mounting clips so that they are in the positions shown with a dotted line in the previ-
ous figure.
The figure below shows the front and back of a mounting clip. Insert each clip so that its
front faces outward.
Pull the DIN rail mounting clips down to release them.
MP2300 Rear Side
Insert the parts in these positions
Front Back
MP2300
YASKAWA RUN
RDY
ALM ERR
TX BAT
STOP
SUP
INT
CNFG
MON
SW1
TEST
OFF ON
M-I/II
BATTERY
CPU I/O
DC24V
DC 0V
Clip
4.1 Handling MP2300
DIN rail
mounting
parts
inserted
4-3