YASKAWA JEPMC-MP2300-Y Series User Manual page 4

This symbol is used to indicate important information that should be memorized or minor precautions,
such as precautions that will result in alarms if not heeded.
Manual Name
Machine Controller MP2300 Communication
Module
User's Manual
Machine Controller MP900/MP2000 Series
User's Manual, Ladder Programming
Machine Controller MP900/MP2000 Series
User's Manual
Motion Programming
Machine Controller MP900/MP2000 Series
MPE720 Software for Programming Device
User's Manual
Σ Series SGM /SGD
User's Manual
Σ Series SGM /SGD
User's Manual
High-speed Field Network
MECHATROLINK-compatible AC Servo Drivers
Σ-II Series
SGM H/SGDM User's Manual
Σ-II Series
SGM H/SGDM User's Manual
Σ-III Series SGM H/SGDS
User's Manual
Σ-III Series SGM S/SGDS Digital Operator
Operating Instructions
iv
■ Graphic Symbols Used in this Manual
The graphic symbols used in this manual indicate the following type of information.
■ Indication of Reverse Signals
In this manual, the names of reverse signals (ones that are valid when low) are written with a
forward slash (/) before the signal name, as shown in the following example:
Notation Examples
• S-ON =Å@/S-ON
• P-CON =Å@/P-
CON
Related Manuals
The following table lists the manuals relating to the MP2500(M). Refer to these manuals as
required.
SIEP C880700 04
SIEZ-C887-1.2
SIEZ-C887-1.3
SIEP C880700 05
SIEZ-S800-26.3
SIEZ-S800-26.4
SIEP S8000 05
SIEP S8000 15
SIEP S800000 00
TOBEP S800000
01
Manual Number
Describes the functions, specifications, and appli-
cation methods of the MP2300 Communication
Modules (217IF, 218IF, 260IF, 261IF).
Describes the instructions used in MP900/
MP2000 ladder programming.
Describes the instructions used in MP900/
MP2000 motion programming.
Describes how to install and operate the MP900/
MP2000 Series programming system (MPE720).
Describes the Σ Series SERVOPACK models,
specifications, and capacity selection methods.
Describes the Σ Series SERVOPACK models,
specifications, and capacity selection methods.
Describes the installation, wiring, trial operation,
function applications methods, maintenance, and
inspection of the Σ-II Series SERVOPACKs.
Describes the installation, wiring, trial operation,
function applications methods, maintenance, and
inspection of the Σ-II Series SERVOPACKs.
Describes the models, specifications, wiring, trial
operation, adjustment, function application meth-
ods, maintenance, and inspection of the Σ-III
Series SERVOPACKs and Servomotors.
Describes the operating methods of the JUSP-
OP05A Digital Operator.
Contents