260If-01 Module - YASKAWA JEPMC-MP2300-Y Series User Manual

4 Mounting and Wiring

4.5.3 260IF-01 Module

4.5.3 260IF-01 Module
( 1 ) Connectors
Connector Name
PORT
RS-232C
DeviceNet
DeviceNet
( 2 ) Cables
Model Number
JEPMC-W5311-03
JEPMC-W5311-15
( 3 ) Connector Pin Arrangement
[ a ] PORT Connector
4-68
The following diagram shows the 260IF-01 Module connectors.
Connector No. of
Name Pins
17LE-13090-27(D2BC)
PORT
9
9-pin D-sub
female connector
DeviceNet 5
MSTB2-5/5-GF-5.08AM
■ RS-232C Cable
Length
2.5 m
15 m
■ DeviceNet Cable
The standard cables for DeviceNet are not available. Use a commercially available cable for
DeviceNet. Access to ODVA (Open DeviceNet Vendors Association Inc.) home page for informa-
tion on DeviceNet cables.
The PORT connector is used to connect the MP2300 to computers and HMI devices via an RS-232C
connection.
Pin Signal
Number Name
1 FG Frame ground
2 SD Send data
3 RD Receive data
4 RS Ready to send
5 CS Clear to send
Connector Model
Module Cable
17JE-23090-02 (D8B)
9-pin D-sub
male connector
−
Appearance
(JEPMC-W5311-
Pin
Description
Number
6
7
8
9
Manufacturer
DDK Ltd.
PHEONIX CONTACT
)
Signal
Description
Name
− −
SG Signal ground (0 V)
− −
ER Data terminal ready