2 System Startup and Sample Programs
2.2.2 Operation Check 2: Position Control
( 3 ) Display Tuning Panel for H04 Drawing
2-44
1.
Use the same procedure as
Programs folder in the File Manager Window and select Open - Tuning Panel from
the pop-up menu that is displayed.
Engineering Manager will start and the following Tuning Panel Window for the H04 Drawing
will be displayed.
Model system operation can be controlled by writing the current values for Common Operation
and Positioning Operation and Settings from the Tuning Panel.
the H04 Drawing in the High Scan
2.2.1 ( 2 ). Right-click