2.1.5 Starting and Preparing MPE720
This section describes the preparation for connecting the MPE720 (motion programming software,
optional) to the MP2300 and the method for installing the sample program for the MP2300.
The explanation is given assuming that the MPE720 has been installed on your personal computer.
The reference sections for the MPE720 startup procedure and each operation as follows.
Starting the MPE720
1.
Communication process settings
2.
Define the communication with MP2300.
Create a group folder
3.
Create a Group Folder to save Order Folders.
Create an order folder
4.
Create an Order Folder to save Controller Folders.
Create a controller folder
5.
Create a Controller Folder to save programs.
Refer to Machine Controller MP900/MP2000 Series MPE720 Software for Programming Device
User's Manual (Manual No. SIEP C880700 05 ) for the installation method of MPE720.
→
2.1.5 ( 1 ) Starting the MPE720 on page 2-8
2.1.5 ( 2 ) Setting and Saving Communication Process on page 2-9
→
2.1.5 ( 3 ) Creating Group Folders (Option) on page 2-15
→
→
2.1.5 ( 4 ) Creating Order Folders (Required) on page 2-16
2.1.5 ( 5 ) Creating Controller Folders (Required) on page 2-17
→
2.1 Model System Startup Procedure
2-7