Condenser - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200
5. Installation should follow the removal procedure
in the reverse order.
•
Tighten the two flange nuts.
•
Evacuate and recharge the A/C system.
Notice: Before installing, check the O-ring and
apply the compressor oil.
YAD7B380

CONDENSER

Removal & Installation Procedure
1. Discharge and recover the refrigerant from the
system.
2. Remove the radiator grill and front bumper.
YAD7B390
3. Remove the inlet pipe.
Remove the O-ring at the same time.
YAD7B400
4. Remove the outlet pipe (at the bottom side) with
O-ring.
YAD7B410
GENERAL HVAC SYSTEM 7B-21