H4: Analog Outputs - YASKAWA CIPR-GA50C series Technical Manual

12.8 H: Terminal Function Selection
■
1F: Not Used
Setting Value Function
1F Not Used
When you set a terminal that you do not use to 1F, you can use the signal that is input to that terminal as the PLC
analog signal input from MEMOBUS/Modbus communications or the communication option. This input signal
does not have an effect on drive operation. This signal functions the same as F (Through Mode).
■
30: DWEZ Analog Input 1
Setting Value Function
30 DWEZ Analog Input 1
■
31: DWEZ Analog Input 2
Setting Value Function
31 DWEZ Analog Input 2
◆

H4: Analog Outputs

H4 parameters set the drive analog monitors. These parameters select monitor parameters, adjust gain and bias,
and select output signal levels.
■
Calibrate Meters Connected to MFAO Terminal AM
Use these parameters to calibrate meters connected to terminal AM:
• H4-02 [Terminal AM Analog Output Gain]
• H4-03 [Terminal AM Analog Output Bias]
Set these parameters where the output voltage of 10 V and output current of 20 mA are 100% of the signal level.
Use jumper switch S5 and parameter H4-07 [Terminal AM Signal Level Select] to set the voltage output and
current output.
No.
H4-02 Terminal AM Analog Output Gain
H4-03 Terminal AM Analog Output Bias
H4-07 Terminal AM Signal Level Select
Figure 12.97 and Figure 12.98
For example, when the parameter value set to analog output is 0, and a 3 V signal is to be output to terminal AM,
set H4-03 [AM Analog Output Bias] = 30%.
652
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Use this setting for unused terminals or to use terminals in through mode.
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Use with DriveWorksEZ. Refer to the DriveWorksEZ online manual for more information.
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Use with DriveWorksEZ. Refer to the DriveWorksEZ online manual for more information.
Name
show the gain and bias.
Figure 12.97 Analog Output Gain/Bias Configuration Example 1
Description
Description
Description
Range
-999.9 - +999.9%
-999.9 - +999.9%
0: 0 +10 VDC
2: 4-20 mA
YASKAWA SIEPC71061753A GA500 Technical Manual
Default
100.0%
0.0%
0