Set And View Necessary Parameters; Change Parameter Settings - YASKAWA CIPR-GA50C series Technical Manual
Ac micro drives for industrial applications. 200 v class, three-phase input: 0.1 to 22 kw. 200 v class, single-phase input: 0.1 to 4.0 kw. 400 v class, three-phase input: 0.37 to 30 kw.
Hide thumbs
Also See for CIPR-GA50C series:
- Installation and operation instruction manual (310 pages) ,
- Technical manual (794 pages) ,
- Installation and operation instruction manual (79 pages)
Table of Contents
Advertisement
◆
Set and View Necessary Parameters
Show the frequency reference screen.
Note:
Press and hold a
to return to frequency reference screen from any screen.
The setup mode shows the parameters set in A2-01 to A2-32 [User Parameter 1 to User Parameter 32]. This lets
you quickly access and change these parameters.
Note:
Setup mode always shows
for A2-01 to A2-32 change. You can easily view and set the necessary parameters.
Continue to change the parameters or press and hold
◆
Change Parameter Settings
Show the frequency reference screen in advance.
Note:
Push and hold
to go back to the frequency reference screen from any screen.
This example shows how to change C1-01 [Acceleration Time 1]. Set the parameter to the necessary value.
YASKAWA SIEPC71061753A GA500 Technical Manual
Figure 4.16 How to Examine the Changed Parameters
(A1-06 [Application Selection]) at the top of the list. When you change the setting, the settings
Figure 4.17 View and Set the Necessary Parameters
to go back to the frequency reference screen.
4.7 Keypad Operation
129
4
Advertisement
Table of Contents
Troubleshooting
