YASKAWA CIPR-GA50C series Technical Manual page 297
Ac micro drives for industrial applications. 200 v class, three-phase input: 0.1 to 22 kw. 200 v class, single-phase input: 0.1 to 4.0 kw. 400 v class, three-phase input: 0.37 to 30 kw.
Hide thumbs
Also See for CIPR-GA50C series:
- Installation and operation instruction manual (310 pages) ,
- Technical manual (794 pages) ,
- Installation and operation instruction manual (79 pages)
Table of Contents
Advertisement
2.
Pull the cooling fan straight up from the drive. Disconnect the power supply connector and remove the fan
from the drive.
A - Cooling fan
■
Install a Fan
Reverse the removal procedure to install a cooling fan.
1.
Connect the power supply connector between the drive and cooling fan.
2.
Align the notches on the fan with the pins on the drive and install the cooling fans in the drive.
A - Alignment pins on drive
B - Front of drive
Note:
When you install the cooling fan, make sure that you do not pinch cables between the cooling fan and the drive.
YASKAWA SIEPC71061753A GA500 Technical Manual
Figure 8.2 Remove the Cooling Fan
Figure 8.3 Connect the Power Supply Connector
C - Notch on fan
Figure 8.4 Install the Cooling Fan
8.4 Replace Cooling Fans
8
297
Advertisement
Table of Contents
Troubleshooting
