YASKAWA CIPR-GA50C series Technical Manual page 332
Ac micro drives for industrial applications. 200 v class, three-phase input: 0.1 to 22 kw. 200 v class, single-phase input: 0.1 to 4.0 kw. 400 v class, three-phase input: 0.37 to 30 kw.
Hide thumbs
Also See for CIPR-GA50C series:
- Installation and operation instruction manual (310 pages) ,
- Technical manual (794 pages) ,
- Installation and operation instruction manual (79 pages)
Table of Contents
Advertisement
10.9 Peripheral Devices and Options
Name
DeviceNet
SI-N3
Modbus TCP/IP
SI-EM3
MECHATROLINK-II
SI-T3
MECHATROLINK-III
SI-ET3
332
Model
This option uses the host controller over DeviceNet communication to:
• Operate and stop the drive
• Set and view parameters
• Monitor output frequency, output current, and other statuses
Note:
The drive is compatible with option software versions 1114 and later.
This option uses the host controller over Modbus TCP/IP communication to:
• Operate and stop the drive
• Set and view parameters
• Monitor output frequency, output current, and other statuses
This option uses the host controller over MECHATROLINK-II communication
to:
• Operate and stop the drive
• Set and view parameters
• Monitor output frequency, output current, and other statuses
Note:
The drive is compatible with option software versions 6108 and later.
This option uses the host controller over MECHATROLINK-III
communication to:
• Operate and stop the drive
• Set and view parameters
• Monitor output frequency, output current, and other statuses
Note:
The drive is compatible with option software versions 6202 and later.
Intended Use
YASKAWA SIEPC71061753A GA500 Technical Manual
Document No.
TOBPC73060084
SIJPC73060084
TOBPC73060091
SIJPC73060091
TOBPC73060086
SIJPC73060086
TOBPC73060088
SIJPC73060088
Advertisement
Table of Contents
Troubleshooting
