Install The Keypad To A Control Panel Or Another Device; Operate The Keypad Apart From The Drive - YASKAWA CIPR-GA50C series Technical Manual
Ac micro drives for industrial applications. 200 v class, three-phase input: 0.1 to 22 kw. 200 v class, single-phase input: 0.1 to 4.0 kw. 400 v class, three-phase input: 0.37 to 30 kw.
Hide thumbs
Also See for CIPR-GA50C series:
- Installation and operation instruction manual (310 pages) ,
- Technical manual (794 pages) ,
- Installation and operation instruction manual (79 pages)
Table of Contents
Advertisement
2.8 Install the Keypad to a Control Panel or Another Device
2.8
Install the Keypad to a Control Panel or Another Device
◆
Operate the Keypad Apart from the Drive
You can remove the keypad from the drive and connect it to a remote control extension cable 3 m (9.8 ft) long to
make operation easier when you cannot access the drive. You can operate a drive that is in a control panel without
opening or closing the control panel door. To order optional accessories, contact Yaskawa or your nearest sales
representative.
Name
1 m: WV001
Extension Cable
3 m: WV003
Installation Support Set A
900-192-933-001
Installation Support Set B
900-192-933-002
42
Model
To connect the keypad and drive.
This option is an RJ-45, 8-pin straight-through UTP CAT5e cable.
To attach the keypad to the control panel. This option uses screws.
To attach the keypad to the control panel. This option uses nut clamps.
Use this option when weld studs are located in the control panel.
Intended Use
YASKAWA SIEPC71061753A GA500 Technical Manual
Advertisement
Table of Contents
Troubleshooting
