YASKAWA CIPR-GA50C series Technical Manual page 300
Ac micro drives for industrial applications. 200 v class, three-phase input: 0.1 to 22 kw. 200 v class, single-phase input: 0.1 to 4.0 kw. 400 v class, three-phase input: 0.37 to 30 kw.
Hide thumbs
Also See for CIPR-GA50C series:
- Installation and operation instruction manual (310 pages) ,
- Technical manual (794 pages) ,
- Installation and operation instruction manual (79 pages)
Table of Contents
Advertisement
8.4 Replace Cooling Fans
2.
Install the cooling fans so that they align with the pins on the drive.
A - Alignment pins on drive
B - Front of drive
Note:
When you install the cooling fan, make sure that you do not pinch cables between the cooling fan and the drive.
3.
Put the cable and connector in the recess of the drive.
A - Front of drive
4.
Insert the tabs of the fan cover into the holes in the drive and press in the fan cover until the hook clicks
into place.
5.
Energize the drive and set o4-03 = 0 [Fan Operation Time Setting = 0 h] to reset the cooling fan operation
time.
300
Figure 8.13 Installing the cooling fans
Figure 8.14 Putting the cable and connector in the recess
Figure 8.15 Reattach the Fan Finger Guard
C - Notches
YASKAWA SIEPC71061753A GA500 Technical Manual
Advertisement
Table of Contents
Troubleshooting
