YASKAWA CIPR-GA50C series Technical Manual page 734

12.11 o: Keypad-Related Settings
■
o1-39: Show Initial Setup Screen
No.
Name
(Hex.)
o1-39 Show Initial Setup Screen
(11BC)
RUN
The initial setup screen shows a menu where you can select the display language, set the date, time, and other
basic settings. When you set this parameter to 0, the drive will not show this screen each time you energize the
drive.
0 : No
The drive will not show the initial setup display screen each time you energize the drive. The drive will show the
Home screen.
1 : Yes
When you input the Run command before you energize the drive or when the you turn on the Run command while
the drive shows the initial setup screen, the drive will replace the initial setup screen with the Home screen.
■
o1-40: Home Screen Display Selection
No.
Name
(Hex.)
o1-40 Home Screen Display
Selection
(11BD)
RUN
0 : Custom Monitor
1 : Bar Graph
2 : Analog Gauge
3 : Trend Plot
■
o1-41: 1st Monitor Area Selection
No.
Name
(Hex.)
o1-41 1st Monitor Area Selection
(11C1)
RUN
0 : +/- Area ( - o1-42 ~ o1-42 )
1 : + Area ( 0 ~ o1-42 )
2 : - Area ( - o1-42 ~ 0 )
■
o1-42: 1st Monitor Area Setting
No.
Name
(Hex.)
o1-42 1st Monitor Area Setting
(11C2)
RUN
■
o1-43: 2nd Monitor Area Selection
No.
Name
(Hex.)
o1-43 2nd Monitor Area Selection
(11C3)
RUN
0 : +/- Area ( - o1-44 ~ o1-44 )
1 : + Area ( 0 ~ o1-44 )
2 : - Area ( - o1-44 ~ 0 )
734
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the function to show the LCD keypad initial setup screen each time the drive is energized.
This parameter is only available when using an LCD keypad.
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the monitor display mode for the Home screen. This parameter is only available when using
an LCD keypad.
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the horizontal range used to display the monitor set in o1-24 [Custom Monitor 1] as a bar
graph. This parameter is only available when using an LCD keypad.
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the horizontal axis value used to display the monitor set in o1-24 [Custom Monitor 1] as a
bar graph. This parameter is only available when using an LCD keypad.
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Selects the horizontal range used to display the monitor set in o1-25 [Custom Monitor 2] as a bar
graph. This parameter is only available when using an LCD keypad.
Description
Description
Description
Description
Description
YASKAWA SIEPC71061753A GA500 Technical Manual
Default
(Range)
1
(0, 1)
Default
(Range)
0
(0 - 3)
Default
(Range)
0
(0 - 2)
Default
(Range)
100.0%
(0.0 - 100.0%)
Default
(Range)
0
(0 - 2)