YASKAWA CIPR-GA50C series Technical Manual page 49
Ac micro drives for industrial applications. 200 v class, three-phase input: 0.1 to 22 kw. 200 v class, single-phase input: 0.1 to 4.0 kw. 400 v class, three-phase input: 0.37 to 30 kw.
Hide thumbs
Also See for CIPR-GA50C series:
- Installation and operation instruction manual (310 pages) ,
- Technical manual (794 pages) ,
- Installation and operation instruction manual (79 pages)
Table of Contents
Advertisement
*1
Set the wiring sequence to de-energize the drive with the MFDO. If the drive outputs a fault during fault restart when you use the
fault restart function, set L5-02 = 1 [Fault Contact at Restart Select = Always Active] to de-energize the drive. Be careful when you
use a cut-off sequence. The default setting for L5-02 is 0 [Active Only when Not Restarting].
*2
When you install a DC reactor, you must remove the jumper between terminals +1 and +2.
YASKAWA SIEPC71061753A GA500 Technical Manual
Figure 3.1 Standard Drive Connection Diagram
3.2 Electrical Installation
49
3
Advertisement
Table of Contents
Troubleshooting
