YASKAWA CIPR-GA50C series Technical Manual page 629

■
0: During Run
Setting Value Function
0 During Run
ON : Drive is running
The drive is receiving a Run command or outputting voltage.
OFF : Drive is stopping
Drive is stopped.
■
1: Zero Speed
Setting Value Function
1 Zero Speed
Note:
Parameter A1-02 [Control Method Selection] selects which parameter is the reference.
A1-02 Setting
0 V/f
2 OLV
5 OLV/PM
6 AOLV/PM
8 EZOLV
ON : Output frequency < value of E1-09 or b2-01.
OFF : Output frequency ≥ value of E1-09 or b2-01.
■
2: Speed Agree 1
Setting Value Function
2 Speed Agree 1
Note:
The detection function operates in the two motor rotation directions.
YASKAWA SIEPC71061753A GA500 Technical Manual
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
The terminal activates when the Run command is input and when the drive is outputting voltage.
Figure 12.76 Drive Running Time Chart
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
The terminal activates when the output frequency is less than the value of E1-09 [Minimum Output Frequency] or b2-01 [DC
Injection/Zero SpeedThreshold].
Control Method Selection
Figure 12.77 Zero Speed Time Chart
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
The terminal activates when the output frequency is in the range of the frequency reference ± L4-02 [Speed Agree Detection
Width].
12.8 H: Terminal Function Selection
Description
Description
Parameter Used as the Reference
E1-09
b2-01
E1-09
E1-09
E1-09
Description
12
629