YASKAWA CIPR-GA50C series Technical Manual page 298
Ac micro drives for industrial applications. 200 v class, three-phase input: 0.1 to 22 kw. 200 v class, single-phase input: 0.1 to 4.0 kw. 400 v class, three-phase input: 0.37 to 30 kw.
Hide thumbs
Also See for CIPR-GA50C series:
- Installation and operation instruction manual (310 pages) ,
- Technical manual (794 pages) ,
- Installation and operation instruction manual (79 pages)
Table of Contents
Advertisement
8.4 Replace Cooling Fans
3.
Put the cable and connector in the recess of the drive.
A - Front of drive
Note:
The connector installation position is different for different models.
4.
Insert the fan cover straight until the hook clicks into place.
5.
Energize the drive and set o4-03 = 0 [Fan Operation Time Setting = 0 h] to reset the cooling fan operation
time.
298
Figure 8.5 Put the Cable and Connector in the Drive Recess
Figure 8.6 Put the Connector in the Recess
Figure 8.7 Put the Connector in Between the Fans
Figure 8.8 Put the Connector in Between the Drive and Fan
Figure 8.9 Reattach the Fan Finger Guard
YASKAWA SIEPC71061753A GA500 Technical Manual
Advertisement
Table of Contents
Troubleshooting
