YASKAWA CIPR-GA50C series Technical Manual page 543

■
d1-03: Reference 3
No.
Name
(Hex.)
d1-03 Reference 3
(0282)
RUN
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• When A1-02 = 6 [Control Method Selection = AOLV/PM], the drive sets o1-03 = 1 [0.01% (100% = E1-04)].
• To set d1-03 to Multi-Step Speed 3, set H3-02 and H3-10 ≠ 3 [MFAI Function Select ≠ Auxiliary Frequency Reference 2].
■
d1-04: Reference 4
No.
Name
(Hex.)
d1-04 Reference 4
(0283)
RUN
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• When A1-02 = 6 [Control Method Selection = AOLV/PM], the drive sets o1-03 = 1 [0.01% (100% = E1-04)].
• This parameter sets the frequency reference of Multi-Step Speed 4.
■
d1-05: Reference 5
No.
Name
(Hex.)
d1-05 Reference 5
(0284)
RUN
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• When A1-02 = 6 [Control Method Selection = AOLV/PM], the drive sets o1-03 = 1 [0.01% (100% = E1-04)].
• This parameter sets the frequency reference of Multi-Step Speed 5.
■
d1-06: Reference 6
No.
Name
(Hex.)
d1-06 Reference 6
(0285)
RUN
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• When A1-02 = 6 [Control Method Selection = AOLV/PM], the drive sets o1-03 = 1 [0.01% (100% = E1-04)].
• This parameter sets the frequency reference of Multi-Step Speed 6.
■
d1-07: Reference 7
No.
Name
(Hex.)
d1-07 Reference 7
(0286)
RUN
Note:
• The upper limit value changes when the E1-04 [Maximum Output Frequency] and d2-01 [Frequency Reference Upper Limit] values
change.
• When A1-02 = 6 [Control Method Selection = AOLV/PM], the drive sets o1-03 = 1 [0.01% (100% = E1-04)].
• This parameter sets the frequency reference of Multi-Step Speed 7.
YASKAWA SIEPC71061753A GA500 Technical Manual
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Description
Description
Description
Description
Description
12.5 d: References
Default
(Range)
0.00 Hz
(0.00 - 590.00 Hz)
Default
(Range)
0.00 Hz
(0.00 - 590.00 Hz)
Default
(Range)
0.00 Hz
(0.00 - 590.00 Hz)
Default
(Range)
0.00 Hz
(0.00 - 590.00 Hz)
Default
(Range)
0.00 Hz
(0.00 - 590.00 Hz)
12
543