Toyota Celica 2005 Repair Manual page 1089

DI−888
2005 CELICA (RM1131U)
DIAGNOSTICS − SUPPLEMENTAL RESTRAINT SYSTEM
8. RELEASE METHOD OF AIRBAG ACTIVATION PRE-
VENTION MECHANISM
An airbag activation prevention mechanism is built into the con-
nector for the squib circuit of the SRS.
As explained in the troubleshooting later, insert a paper with the
same thickness as the male terminal between the terminal and
the short spring to release it (Refer to illustrations on next 2
pages).
CAUTION:
Never release the airbag activation prevention mechanism
on the squib connector.
NOTICE:
Do not release the airbag activation prevention mech-
S
anism unless specifically directed by the trouble-
shooting procedure.
To prevent the terminal and the short spring to be
S
damaged, always use a paper with the same thick-
ness as the male terminals.
1088