Displaying Tcp Traffic Statistics - Dell PowerConnect B-RX Configuration Manual

7
Displaying IP information
TABLE 57
This field...
input errors
in segments
out segments
retransmission
RIP statistics
The RIP statistics are derived from RFC 1058, "Routing Information Protocol".
requests sent
requests received
responses sent
responses received
unrecognized
bad version
bad addr family
bad req format
bad metrics
bad resp format
resp not from rip port
resp from loopback
packets rejected

Displaying TCP traffic statistics

You can use the show ip tcp traffic command to display TCP traffic statistics.
BigIron RX# show ip tcp traffic
TCP Statistics
233 active opens, 0 passive opens, 1659 failed attempts 117547
active resets, 0 passive resets, 116511 input errors 141627 in
segments, 18866 out segments, 71 retransmission
Syntax: show ip tcp traffic
234
CLI display of IP traffic statistics (Continued)
Displays...
This information is used by Brocade customer support.
The number of TCP segments received by the device.
The number of TCP segments sent by the device.
The number of segments that this device retransmitted because the
retransmission timer for the segment had expired before the device at the
other end of the connection had acknowledged receipt of the segment.
The number of requests this device has sent to another RIP router for all or
part of its RIP routing table.
The number of requests this device has received from another RIP router for
all or part of this device's RIP routing table.
The number of responses this device has sent to another RIP router's
request for all or part of this device's RIP routing table.
The number of responses this device has received to requests for all or part
of another RIP router's routing table.
This information is used by Brocade customer support.
The number of RIP packets dropped by the device because the RIP version
was either invalid or is not supported by this device.
The number of RIP packets dropped because the value in the Address Family
Identifier field of the packet's header was invalid.
The number of RIP request packets this router dropped because the format
was bad.
This information is used by Brocade customer support.
The number of responses to RIP request packets this router dropped
because the format was bad.
This information is used by Brocade customer support.
The number of RIP responses received from loopback interfaces.
This information is used by Brocade customer support.
BigIron RX Series Configuration Guide
53-1002253-01