Clear Tcp Statistics - Dell Z9500 Command Reference Manual

Version
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.2.1.1
Related
show ip traffic
Commands

clear tcp statistics

Clear TCP counters.
Z9500
Syntax
clear tcp statistics [all | cp | rp]
Parameters
all
cp
rp
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
IPv4 Routing
Description
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays IP traffic statistics.
Enter the keyword all to clear TCP statistics maintained on
all switch processors.
(OPTIONAL) Enter the cp to clear TCP statistics only from
the Control Processor.
(OPTIONAL) Enter the keyword rp1 to clear TCP statistics
only from the Route Processor.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
933