Clear Ip Route; Clear Tcp Statistics - Dell Force10 S4810P Reference Manual

clear ip route

Clear one or all routes in the routing table.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clear ip route {* | ip-address mask | vrf vrf instance}
Parameters
*
ip-address mask
vrf instance
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.9.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Related
ip route
Commands
show ip route
show ip route summary

clear tcp statistics

Clear TCP counters.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clear tcp statistics [all | cp | rp1 | rp2]
Parameters
all
842
Enter an asterisk (*) to clear all learned IP routes.
Enter a specific IP address and mask in dotted decimal format to
clear that IP address from the routing table.
(Optional) E-Series Only: Clear only the routes tied to the VRF
instance.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced VRF on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– assigns an IP route to the switch.
– views the routing table.
– views a summary of the routing table.
NOTE: These options are supported only on the E-Series.
Enter the keyword all to clear all TCP statistics maintained on all
switch processors.