Interface Vlan; Interface Range Vlan; Mode Dvlan-Tunnel; Name - Dell PowerConnect M6348 Cli Reference Manual

VLAN
Command
dvlan-tunnel ethertype

interface vlan

interface range vlan

mode dvlan-tunnel

name

protocol group

protocol vlan group

protocol vlan group all

show dvlan-tunnel

show dvlan-tunnel interface

show interfaces switchport

show port protocol

show switchport protected

show vlan

show vlan association mac

show vlan association subnet

switchport access vlan

switchport forbidden vlan

switchport general acceptable-
frame-type tagged-only

switchport general allowed vlan

switchport general ingress-filtering
disable

switchport general pvid

70
Description
Configures the EtherType for the interface.
Enters the interface configuration (VLAN) mode.
Enters the interface configuration mode to configure
multiple VLANs.
Enables Double VLAN tunneling on the specified interface IC
Configures a name to a VLAN.
vlanid
Attaches a to the protocol-based VLAN identified by
groupid
.
Adds the physical unit/port interface to the protocol-based
groupid
VLAN identified by
Adds all physical unit/port interfaces to the protocol-based
groupid
VLAN identified by
Displays all interfaces enabled for Double VLAN Tunneling. PE
Displays detailed information about Double VLAN
Tunneling for the specified interface.
Displays switchport configuration.
Displays the Protocol-Based VLAN information for either
the entire system or for the indicated group
Displays protected group/port information.
Displays VLAN information.
Displays the VLAN associated with a specific configured
MAC address.
Displays the VLAN associated with a specific configured IP
subnet.
Configures the VLAN ID when the interface is in access
mode.
Forbids adding specific VLANs to a port.
Discards untagged frames at ingress.
Adds or removes VLANs from a port in General mode.
Disables port ingress filtering.
Configures the PVID when the interface is in general mode. IC
.
.
Mode*
GC
GC
GC
IC
VLAN
IC
GC
PE
PE
PE
PE
PE
PE
PE
IC
IC
IC
IC
IC