Show Port Protocol - Dell Networking 7048 Reference Manual

GVRP status: Disabled
Port 2/0/19 is member in:
VLAN Name
---- ---------
2921 Primary A
2922 Community A1
Static configuration:
PVID: 2922
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
GVRP status: Disabled
Port 2/0/19 is member in:
VLAN Name
---- ---------
2921 Primary A
2922 Community A1

show port protocol

Use the show port protocol command in Privileged EXEC mode to display
the Protocol-Based VLAN information for either the entire system or for the
indicated group.
Syntax
show port protocol {
groupid — The protocol-based VLAN group ID, which is automatically
•
generated when you create a protocol-based VLAN group with the vlan
protocol group command.
all — Enter all to show all interfaces.
•
Default Configuration
This command has no default configuration.
untagged
untagged
groupid
| all}
Egress rule
-----------
Egress rule
-----------
untagged
untagged
VLAN Commands
Type
-----
Static
Static
Type
-----
Static
Static
823