Clear Arp-Cache Management - Dell Networking 7048 Reference Manual

console#clear arp-cache gateway

clear arp-cache management

Use the clear arp-cache management command to clear all entries that show
as management arp entries in the show arp command.
Syntax
clear arp-cache management
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In the example below, out-of-band management entries are shown, for
example, those from the out-of-band interface.
console#show arp
Age Time (seconds)............................. 1200
Response Time (seconds).................... 1
Retries................................................... 4
Cache Size............................................ 6144
Dynamic Renew Mode....................... Disable
Total Entry Count Current / Peak...... 0 / 0
Static Entry Count Configured / Active / Max.. 0 / 0 / 128
IP Address
---------------
10.27.20.241
10.27.20.243
MAC Address
-----------------
001A.A0FF.F662
0019.B9D1.29A3
Interface
-------------- --------
Management Dynamic
Management Dynamic
ARP Commands
Type Age
-----------
n/a
n/a
899