Dell C9000 Series Reference Manual page 525

Networking command-line reference guide
Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

routes | detail | flap-statistics | routes | {received-routes
[network [network-mask]]} | {denied-routes [network [network-
mask]]}]
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
ip-address
advertised-routes
dampened-routes
detail
flap-statistics
routes
received-routes
[network
[network-mask]
denied-routes
[network
[network-mask]
(OPTIONAL) Enter the keyword vrf and then the name of the
VRF to view information exchanged by BGP neighbors
corresponding to that VRF.
NOTE:
You can use this attribute to view information
exchanged by BGP neighbors that correspond to either a
default or a non-default VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view information related only to ipv4 multicast
routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
unicast to view information related only to ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the keyword
unicast to view information related only to ipv6 unicast routes.
(OPTIONAL) Enter the IP address of the neighbor to view only
BGP information exchanged with that neighbor.
(OPTIONAL) Enter the keywords advertised-routes to view
only the routes the neighbor sent.
(OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
(OPTIONAL) Enter the keyword detail to view neighbor-
specific internal information for the IPv4 Unicast address family.
(OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor's routes.
(OPTIONAL) Enter the keyword routes to view only the
neighbor's feasible routes.
(OPTIONAL) Enter the keywords received-routes then either
the network address (in dotted decimal format) or the network
mask (in slash prefix format) to view all information received
from neighbors.
NOTE:
Configure the neighbor soft-
reconfiguration inbound command prior to
viewing all the information received from the neighbors.
(OPTIONAL) Enter the keywords denied-routes then either
the network address (in dotted decimal format) or the network
mask (in slash prefix format) to view all information on routes
denied via neighbor inbound filters.
Border Gateway Protocol
525

Advertisement

Table of Contents
loading

Table of Contents