Show Ip Bgp Peer-Group - Dell C9000 Series Reference Manual

Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information The following describes the show ip bgp paths community command shown in
the following example.
Field
Address
Hash
Refcount
Community
Example
Dell#show ip bgp paths community
Total 2 communities
Refcount
1
1

show ip bgp peer-group

View information on the BGP peers in a peer group.
C9000 Series
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] peer-group [peer-group-name [detail | summary]]
Parameters
vrf vrf-name
Description
Introduced on the C9010.
Introduced on the S3048–ON and S4048–ON.
Introduced on the S6000–ON.
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the internal address where the path attribute is stored.
Displays the hash bucket where the path attribute is stored.
Displays the number of BGP routes using these communities.
Displays the community attributes in this BGP path.
Community
NO-ADVERTISE
200:1 1000:1
(OPTIONAL) Enter the keyword vrf to view information on BGP
peers in a peer group corresponding to that VRF.
3000:1
Border Gateway Protocol 534