3.4.2 Stack Tray Lower Limit
Sensor
3.4.2.1
Removing the
Stack
Tray
Limit Sensor
1) Open the front cover [1] of the finisher.
2) Pull the lever [2] and draw out the
finisher.
[3]
[2]
F-3-131
3) Remove the screw [1] on the back of the
finisher and remove the harness guide [2].
4) Disconnect the connector [3] and
remove the sensor [4].
Lower
0008-1231
[1]
[3]
[1]
F-3-132
3.4.3
Process
Sensor
3.4.3.1
Removing the
PCB Cover
1) Open the front cover [1] of the finisher.
2) Pull the lever [2] and draw out the
finisher.
Chapter 3
[2]
[4]
Tray
Paper
0008-1174
3-39