Procedure; Removing The Toner Sensor And Multi Pickup Sensor Unit (Mf4890Dw/Mf4880Dw); Preparation - Canon imageCLASS MF4890dw Service Manual

4
Disassembly/Assembly > Controller System > Removing the Toner Sensor and Multi Pickup Sensor Unit (MF4890dw/MF4880dw) > Procedure
Note:
The below picture shows how to wind the harness.
4 Disassembly/Assembly > Controller System > Removing the Toner Sensor and Multi Pickup Sensor Unit (MF4890dw/MF4880dw) > Procedure
Removing the Toner Sensor and Multi Pickup Sensor
Unit (MF4890dw/MF4880dw)

■ Preparation

1) Remove the left cover
2)Remove the DADF unit and reader unit.
3)Remove the right cover
4)Remove the front cover unit.
5)Remove the upper cover.
6)Remove the wireless LAN PCB.

■ Procedure

1)Remove the scanner cover[1]
• 2 screws(black TP)[2]
F-4-364
x2
4-151
[2]
[1]
F-4-365
4-151